How to flash and unbrick Redmi Note 4 with SP Flash Tool

Xiaomi is China’s best Android smart device as well as other technology accessories manufacturer with best battery backup. Because they have the best battery backup and also can work for hrs without any hanging issue, individuals like Xiaomi smartphone extremely much. Just like Xiaomi Redmi note 4 gadget which has ideal battery backup ever.

Battery features, sometimes Xiaomi smart device users face troubles with their tool’s software due to some trojan infections, irresponsive device practices as well as other little problems inside. To take care of these device glitches, you have to blink supply firmware on your gadget utilizing Flashing tools if manufacturing facility reset not functioning.

What is Sp Flash Tool

A smartphone flash device is an easy Application, and it services running systems like Windows And also Linux. SP Flash tool lets you set up any firmware to your Mediatek (MTK) Android devices. This device is utilized to un-brick the hard bricked android phones. Difficult Bricking is the state of your android phone where your phone does not activate, or your phone goes into a boot loop.

Features of Sp Flash Tool

1. Working ability on both Linux as well as Windows computer system
2. Faster performance
3. Capability to flash both Supply and also Custom ROMs
4. Ability to blink Customized recovery
5. Monitoring as well as confirming the outside RAM
6. Formatting the tool

Pre-requisites:

• Battery should be charged up to 70 per cent.
• Xiaomi Redmi Note 4 USB cable offered.
• SP Flash Tool – Download
• SP flash tool we require to mount MediaTek USB driver
• Xiaomi Redmi Note 4 firmware file – Download
• You need to take your device backup (for safety and security factors).

How to Flash Redmi and unbrick  Redmi Note 4 using SP Flash Tool

Utilizing SP Flash Tool, you can blink Xiaomi Redmi Note 4 Android tool (however make sure to examine if it is based on Mediatek IC). Flash any type of custom-made or stock ROM over Xiaomi Redmi Note 4 Android tool. Additionally, do see to it that you have mounted Xiaomi Redmi Note 4 USB drivers effectively on your PC before blinking any firmware file.

Steps to Flash Redmi and unbrick  Redmi Note 4 using SP Flash Tool

Step 1: First make sure you’ve got all required USB drivers installed on your PC or laptop.

Step 2: Download and install the officisl ROM for your Redmi Note 4.

Step 3: Extract downloaded ROM to C:\ drive.

Step 4: Download cust.img file and replace cust.img in “images” folder. (on some latest ROM versions it works without replacing cust.img file. In case of error you’ll need to replace cust.img)

Step 5: Install MediaTek USB-VCOM vehicle drivers

Step 6: Launch Sp Flash Tool in "Administrator Setting"

Step 7: Following, click "Scatter-loading" as well as fill the scatter data that lies in the firmware data

Step 8: Now, choose the "Download Agent" most likely to the Sp Flash Device folder and also select "MTK_AllInOne_DA. container".

Step 9: Select “Download only”.

Step 10: Remove checkbox from “userdata” in case you want to save your data and apps. Otherwise the personal data and apps will be removed.

Step 11: Now press “Download” button with green arrow.

Step 12: Turn off your device and connect to PC via USB cable.

Step 13: Wait until you see “Download OK” message.

Step 14: Disconnect your device from PC and turn it on. First startup will take around 10-20 minutes.

Note: Do not interrupt the flashing process. If you do so, your phone will go off and not come on at all. You might get the "USB device not recognized" error on further flashing attempts. You can read this article to fix the common error that occurs while flashing process using SP Flash Tool.

Conclusion

That's it. If you followed every step correctly, you would be able to Flash and unbrick  Redmi Note 4 using SP Flash Tool. To check the latest version of stock ROM or custom ROM installed, you need to close the SP flash tool application, disconnect your device from your computer and reboot it.